Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual page 52

Models: 1246, 1247, 1277, 1278, and 1279
| Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Removal
Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
Maintenance & Service Guide
Presario Series
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
Removing the
4.3-GB or 4.8-
GB Hard Drive
NOTE:
To remove the hard
drive, complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch pad.
3. Remove two
screws from the
hard drive mounting
bracket and lift out
the hard drive with
drive mounting
bracket attached.
Next Step
Illustrations
may show
parts
removed
that are not
part of this
procedure.
It is
necessary
to remove
only the
parts listed
in the
written
procedure.