Models: 1246, 1247, 1277, 1278, and 1279
|
Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Removing the Processor, continued
To replace the processor, complete the following steps:
The notch on the upper left corner of the processor serves as an orientation
IMPORTANT:
indicator. Align the notch on the left corner of the processor with the notch on
the left corner of the processor chassis slot.
1.
Insert the processor into the slot on the system board.
When installing the processor into the chassis slot, be sure that
the hole pattern on the chassis slot lines up with the pins on the
NOTE:
processor. The processor should drop into the socket without any
force.
2.
Insert a small blade screwdriver into the top slot opening on the processor and push away
from the display to lock the processor.
Return to Removal & Replacement Procedures
Maintenance & Service Guide
Presario Series
|
Notice
|
Preface
|
Removal & Replacement Procedures
Pin Assignments
|
Product Description
|
Battery Pack Operations
|
Troubleshooting
|
Specifications