Removing The Display Panel Assembly - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

Models: 1246, 1247, 1277, 1278, and 1279
| Home Page
Illustrated Parts Catalog
Removal and Replacement Procedures
Removal Sequence
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest Cover
with Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
CD Drive
Battery Charger
Board
Modem
Display Panel
Assembly
Upper CPU Cover
Speaker Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch Settings
Memory Module
Maintenance & Service Guide
Presario Series
| Notice | Preface |
| Removal & Replacement Procedures
Pin Assignments |
Product Description
Battery Pack Operations
| Troubleshooting
| Specifications
Removing the
Display Panel
Assembly
NOTE:
To remove the
display panel
assembly,
complete the
following steps:
1. Prepare the
computer for
disassembly.
2. Remove the
palmrest cover with
touch
3. Remove the
heatspreader.
4. Remove the
keyboard.
5. Disconnect the
backlight cable
attached to the
display panel
assembly from the
connector on the
system board.
Next Step
Illustrations
may show
parts
removed
that are not
part of this
procedure.
It is
necessary
to remove
only the
parts listed
in the
written
procedure.
pad.