Antenna Terminals - Denon AVR 1909 - AV Receiver Owner's Manual

ENGLISH

Antenna terminals

An F-type FM antenna cable plug can be connected directly.
AM outdoor antenna
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount

Direction of broadcasting station
FM antenna
AM loop antenna
(supplied)
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
Ground
Connect to the AM
antenna terminals.
Bend in the reverse direction.
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
Connection of AM antennas
1. Push the 2. Insert the 3. Return the
lever. conductor. lever.
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do not
touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.