Denon AVR 1909 - AV Receiver Owner's Manual page 53

S1 Dynamic EQ
Audyssey Dynamic EQ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human perception
and room acoustics. Audyssey Dynamic EQ works in tandem with
Audyssey MultEQ to provide well-balanced sound for every listener
at any volume level.
[Selectable items]
ON
: Use Dynamic EQ function.
OFF
: Do not use Dynamic EQ function.
Operating from the main unit or remote control
unit
DYNAMIC VOLUME
Press .
Dynamic EQ / Volume : ON Dynamic EQ : ON / Volume : OFF
Dynamic EQ / Volume : OFF
• "Dynamic EQ" can only be set when auto setup has been
performed.
• After performing "Auto Setup", the "Dynamic EQ" setting
automatically becomes "ON".
• "Dynamic EQ" cannot be set in the following situations.
⋅ If "Auto Setup" fails to be completed.
⋅ After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
• When "MultEQ" is set to "OFF" , "Dynamic EQ" is automatically set
to "OFF" .
• Before running Auto Setup and after running Auto Setup, if the
number of speakers has increased or you pressed
VOLUME
, "Run Audyssey" is displayed. In this case, either perform
Auto Setup, or return to the setting after running Auto Setup with
"Auto Setup" – "Parameter Check" – "Restore".
NOTE
When you set "Dynamic EQ" to "ON" , "Tone Control" and "Night
Mode" are switched "OFF" .
n
Operating conditions for each function
• Dynamic EQ : When "MultEQ" is set to "ON"
• Dynamic Volume : When "Dynamic EQ" is set to "ON"
• Setting : When "Dynamic Volume" is set to "ON"
S0 MultEQ
S1 Dynamic EQ
S2 Dynamic Volume
S3 Setting
S2 Dynamic Volume
Audyssey Dynamic Volume solves the problem of large variations in
volume level between television programs, commercials, and between
the soft and loud passages of movies.
Audyssey Dynamic EQ is integrated into Dynamic Volume so that as
the playback volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression, and dialog clarity
remain the same.
[Selectable items]
ON
: Use Dynamic Volume.
The Dynamic Volume effect will be at the level of the
"Setting".
OFF
: Do not use Dynamic Volume.
Operating from the main unit or remote control
unit
DYNAMIC VOLUME
Press .
Dynamic EQ / Volume : ON
"Green"
Dynamic EQ / Volume : OFF
• "Dynamic Volume" can only be set when auto setup has been
DYNAMIC
performed.
• "Dynamic Volume" cannot be set in the following situations.
⋅ If "Auto Setup" fails to be completed.
⋅ After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
• When "MultEQ" is set to "OFF" , "Dynamic Volume" is automatically
set to "OFF" .
• Before running Auto Setup and after running Auto Setup, if the
number of speakers has increased or you pressed
VOLUME
, "Run Audyssey" is displayed. In this case, either perform
Auto Setup, or return to the setting after running Auto Setup with
"Auto Setup" – "Parameter Check" – "Restore".
NOTE
"Dynamic Volume" and "Night Mode" cannot be used jointly.
For details on adjusting individual parameters, see "Adjusting the parameters" (vpage 46).
S3 Setting (Dynamic Volume Setting)
Can be set when "Dynamic Volume" is set to "ON" .
Set Dynamic Volume effect.
[Selectable items]
Midnight
Evening
Day
NOTE
• "Setting" can only be set when auto setup has been performed.
• "Setting" cannot be set in the following situations.
⋅ If "Auto Setup" fails to be completed.
⋅ After running Auto Setup, when the number of used speakers has
increased from the number of measured speakers.
Dynamic EQ : ON / Volume : OFF
⋅ If "Dynamic Volume" setting is "OFF" .
"Red"
Audyssey Dynamic EQ™ solves the problem of deteriorating sound
quality as volume is decreased by taking into account human
perception and room acoustics. Dynamic EQ selects the correct
frequency response and surround levels moment-by-moment at
"Off" any user-selected volume setting. The result is bass response,
tonal balance, and surround impression that remain constant
despite changes in volume. Dynamic EQ combines information
from incoming source levels with actual output sound levels in the
room, a prerequisite for delivering a loudness correction solution.
Audyssey Dynamic EQ works in tandem with Audyssey MultEQ to
provide well-balanced sound for every listener at any volume level.
Audyssey Dynamic Volume™ solves the problem of large variations
in volume level between television programs, commercials, and
between the soft and loud passages of movies.
DYNAMIC
Dynamic Volume looks at the preferred volume setting by the user and
then monitors how the volume of program material is being perceived
by listeners in real time to decide whether an adjustment is needed.
Whenever necessary, Dynamic Volume makes the necessary rapid
or gradual adjustments to maintain the desired playback volume
level while optimizing the dynamic range. Audyssey Dynamic EQ is
integrated into Dynamic Volume so that as the playback volume is
adjusted automatically, the perceived bass response, tonal balance,
surround impression, and dialog clarity remain the same whether
watching movies, flipping between television channels, or changing
from stereo to surround sound content.
: High setting affects volume the most, causing all sounds
to be of equal loudness.
: Middle setting prevents loud and soft sounds from
being much louder and softer respectively than average
sounds.
: Low setting provides the least adjustments to the
loudest and softest of sounds.
About Dynamic EQ
About Dynamic Volume
ENGLISH ENGLISH
0 0