Table of Contents
Advertisement
Intel® Server Systems SR1530CL/SR1530HCL/SR1530HCS
and SR1530CLR/SR1530HCLR/SR1530HCLSR
1.6
Power Sub-System
The power sub-system consists of one non-redundant 400-watt power supply. It provides
integrated management features, including over-temperature protection circuitry and over-
voltage protection circuitry.
The power supply operates within the following voltage ranges and ratings:
Parameter
Voltage (110)
Voltage (220)
Frequency
The power supply must operate within all specified limits over the input voltage ranges shown in
the table. Harmonic distortion of up to 10% THD must not cause the power supply to exceed the
specified limits.
The power supply shall power off if the AC input is less than 75 VAC +/- 5 VAC range. The
power supply shall start up if the AC input is greater than 85 VAC +/- 4 VAC. Application of an
input voltage below 85 VAC shall not cause damage to the power supply, including a fuse blow.
1.7
System Cooling
The system provides two non-redundant blower fans. The Intel
SR1530CL/SR1530CLR (SATA) also includes an additional PCI cooling fan. When external
ambient temperatures remain within specified limits, the cooling system will provide sufficient air
flow for all drive configurations, processors, supported memory, and add-in cards.
1.8
Rack and Cabinet Mounting Options
®
The Intel
Server System SR1530CL/SR1530CLR (SATA) can be installed in 19-inch wide by
up to 30-inch deep server cabinets. The system supports three rack mount options:
A fixed mount relay rack/cabinet mount kit which can be configured to mount the system
into either a 2-post or 4-post rack cabinet. (Product order code for the cabinet mount kit:
AXXBRACKETS).
A tool-less full extracting slide rail kit designed to support an optional cable management
arm. (Product order code for the sliding rail kit: AXXHERAIL. Product order code for the
cable management arm: AXXRACKCARM).
A basic slide rail kit designed to mount the chassis into a standard 19-inch by up to 30-
inch deep EIA-310D compatible server cabinet. (Product order code for the slide rail kit:
AXXBASICRAIL).
Revision 2.2
Minimum
Rated
90 Vrms
100-127 Vrms
180 Vrms
200-240 Vrms
47 Hz
Intel order number D71005-005
Maximum
Start up VAC
140 Vrms
85Vac +/-4Vac
264 Vrms
63 Hz
®
Server System
Introduction
Power Off VAC
75Vac +/-5Vac
7
Advertisement
Table of Contents
