IBM 8185 - ThinkCentre M50 - 256 MB RAM User Manual page 75

To install a DIMM:
1. Remove the cover. See "Removing the cover" on page 56.
2. You might have to remove an adapter to gain access to the DIMM slots. See
"Installing adapters" on page 60.
3. Locate the DIMM connectors. See "Identifying parts on the system board" on
page 57.
4. Open the retaining clips.
5. Make sure the notches in the DIMM align with the tabs on the connector. Push
or insert the DIMM straight down into the connector until the retaining clips
close.
What to do next:
v Replace any adapters that were removed.
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 70.
Chapter 3. Types 8196 and 8197
59