Removing The Power Supply Backplane - IBM Netfinity 4500R Type 8656 Hardware Maintenance Manual

Removing the power supply backplane

To remove the power supply backplane:
1.
2.
3.
4.
5.
6.
1
Backplane
2
Insulator
3
Screws (2)
4
Plastic retainer
Remove the cover. See "Removing the cover and bezel" on page 47.
Remove power supplies from the backplane 1 .
Disconnect cables from the backplane.
Remove the two screws 3 .
Remove the plastic retainer 4 .
Remove insulator 2 and replace on new backplane.
FRU information (service only)
107