Removing The Battery Charger Board - Compaq Presario 1600 - Notebook PC Maintenance And Service Manual

Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface
Removal & Replacement Procedures

Removing The Battery Charger Board

Removing
the Battery
Pack
Palmrest
Cover with
Touch Pad
Keyboard
Heatspreader
Status Panel
Interface
Board
Hard Drive
Battery
Charger
Removing the Screws and the Battery Charger
Board
Board
CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
When replacing the battery charger board, ensure the pins are
NOTE:
aligned with the connector on the system board.
| Home | Product Description
| Specifications
| Troubleshooting |
| Connector Pin Assignments
Illustrated Parts Catalog
| Battery Pack
1. Prepare
the
computer for
disassembly.
2. Remove
the palmrest
cover with
touch pad.
3. Remove
the
keyboard.
4. Remove
the hard
drives
5. Remove
the stiffener
bracket.
6. Remove
the two
screws from
the battery
charger
board,
unplug the
board from
the system
board, and
lift out of
the chassis
as shown.
Back to
Preparing
the
Computer
for
Disassembly