Event Log Entries - HP AB500A - Integrated Lights-Out Advanced User Manual

LED indicator
4, 3, and 1
None
4, 3, and 2
Varies
4, 3, 2, and 1
None
HB and 7
The iLO 2 microprocessor firmware includes code that makes consistency checks. If any of these checks
fail, the microprocessor executes the FEH. The FEH presents information using the iLO 2 POST LED
indicators. The FEH codes are distinguished by the alternating flashing pattern of the number 99 plus the
remainder of the error code.
FEH code
9902
9903
9905
9966
99C1

Event log entries

Event log display
Server power failed
Browser login: IP address
Server power restored
Browser logout: IP address
Server reset
Failed Browser login – IP Address: IP address
POST code Description
(activity
completed)
0d Boot Block Main started.
Start C Run time
initialization.
0e Main() has received control.
Varies Each subsystem may self-
test.
0f Start ThreadX.
00 Main_init() completed.
Flashes as the iLO 2
processor executes
firmware code. It does not
change the value of the
lower six LEDs.
Consistency check
TXAPICHK
TXCONTEXT
TRAP
NMIWR
CHKNULL
Event log explanation
Displays when the server power fails.
Displays the IP address for the browser that logged
in.
Displays when the server power is restored.
Displays the IP address for the browser that logged
out.
Displays when the server is reset.
Displays when a browser login fails.
Failure indicated
Boot block could not find a
valid image.
Main self-test failed.
RTOS startup failed.
Subsystem startup failed.
Explanation
An RTOS function was called with an
inappropriate value or from an inappropriate
caller.
The saved context of one or more threads has been
corrupted.
A stack probe failed, the return address is invalid,
or an illegal trap instruction has been detected.
An unexpected write to low memory has occurred.
The reset vector has been modified.
Troubleshooting iLO 2 189