scan the barcode below and then scan a digit (1-9) barcode and the Save
barcode on the
Programming Chart
inside the back cover of this manual.
Default = 1.
Number of Beeps/LED Flashes
Good Read Delay
This sets the minimum amount of time before the image scanner can read
another barcode. Default = 0 ms (No Delay).
* No Delay
Short Delay (500 ms)
Medium Delay (1,000 ms)
Long Delay (1,500 ms)
User-Specified Good Read Delay
If you want to set your own length for the good read delay, scan the barcode
below, then set the delay (from 0-30,000 milliseconds) by scanning digits from
the inside back cover, then scanning Save.
User-Specified Good Read Delay
4 - 3