Table of Contents
Advertisement
USB PC or Macintosh Keyboard
Scan one of the following codes to program the image scanner for USB PC Key-
board or USB Macintosh Keyboard. Scanning these codes adds a CR and LF,
along with selecting the terminal ID (USB PC Keyboard - 124, USB Macintosh
Keyboard - 125, USB PC Japanese Keyboard - 134).
USB Keyboard (Mac)
USB Japanese Keyboard (PC)
USB HID
Scan the following code to program the image scanner for USB HID barcode
image scanners. Scanning this code changes the terminal ID to 131.
USB HID Barcode Image Scanner
USB COM Port Emulation
Scan the following code to program the image scanner to emulate a regular RS-
232-based COM Port. If you are using a Microsoft® Windows® PC, you will
need to download a driver from the Honeywell website
(www.honeywell.com/
aidc). The driver will use the next available COM Port number. Apple® Macin-
tosh computers recognize the image scanner as a USB CDC class device and
automatically uses a class driver. Scanning the code below changes the termi-
nal ID to 130.
USB COM Port Emulation
Note: No extra configuration (e.g., baud rate) is necessary.
2 - 5
Hide quick links:
Advertisement
Table of Contents
