Batch Mode Transmit Delay - Honeywell 4820HDHM User Manual

Batch Mode Transmit Delay

Sometimes when accumulated scans are sent to the host system, the transmis-
sion of those scans is too fast for the application to process. To program a
transmit delay between accumulated scans, scan one of the following delays.
Default = Off.
Note: In most cases, a short (250 ms (milliseconds) delay is ideal; however,
longer delays may be programmed. Contact Technical Support
3) for additional information.
* Batch Mode Transmit Delay Off
(No Delay)
Batch Mode Transmit Delay Medium
(500 ms)
Batch Mode Transmit Delay Short
(250 ms)
Batch Mode Transmit Delay Long
(1000 ms)
(page 15-
3 - 23