Table of Contents
Advertisement
50
Managing Access Server
Starting and stopping the Access Server
Starting and stopping the Access Server
Configuring the Access Server
To end an active session
1
In the Access Server Manager, select the host session that you want to end.
2
In the left navigation pane, under Actions, click End Session.
3
In the confirmation dialog, click Yes.
You can manually stop the Access Server if you want to prevent it from accepting
connections at a particular time. Stopping the Access Server ends all connections
and releases all of the docked hosts.
For example, if the Access Server becomes unstable for any reason, you can try
to manually stop and restart the service to regain stability.
If you change a configuration setting for the Access Server, you must stop and
restart the Access Server for the changes to take effect.
See
"What you can do with the Access Server"
See
"About managing the Access Server"
To start the Access Server
In the Access Server Manager, in the left navigation pane, under Actions,
click Start Server.
This option is available only if the Access Server is not running.
To stop the Access Server
1
In the Access Server Manager, in the left navigation pane, under Actions,
click Stop Server.
This option is available only if the Access Server is running.
2
In the confirmation dialog box, click OK.
When you install the Access Server, you need to specify some of the configuration
options during the installation process. You can change these configuration
settings.
See
"Post-installation tasks"
See
"About managing the Access Server"
on page 44.
on page 48.
on page 46.
on page 48.
Advertisement
Table of Contents
