Table of Contents
Advertisement
Advanced options
See
"About VNC and RDP connections"
To connect with RDP
1
On the host computer, enable RDP using one of the following options:
For Vista and 2K8, right-click My Computer > Properties > Remote
Settings > Remote tab, and then click Allow connections from computers
running any version of Remote Desktop.
For XP, right-click My Computer > Properties > Remote tab, and then
click Allow users to connect remotely to this computer.
For 2K3, right-click My Computer > Properties > Remote tab, and then
click Enable remote desktop on this computer.
2
On the Symantec Management Console, on the Actions menu, click Remote
Control.
3
Select Microsoft Remote desktop as the remote control method.
4
Connect to the host computer.
You can choose the options that let you select the connection options for your
remote control session.
See
"Starting a remote control session"
Advanced options
Table 2-2
Option
Remote control
File transfer
Data port
Use encryption
on page 22.
on page 20.
Description
Click this option to start the session in remote control mode.
Click this option to start the session in file transfer mode.
See
"File transfer options"
Do not change the default setting. For the managed computers
that have updated inventories, the data port setting is read from
the CMDB. If the data port setting is not found, it is read from
the registry entry. If the registry entry is not found, the setting
defaults to 5631.
Click this box to use symmetric AES 128-bit encryption while
you are connected.
Establishing remote connections
Advanced options
on page 31.
23
Advertisement
Table of Contents
