Table of Contents
Advertisement
Naming the Access Server
Access Server settings
Table 4-2
Tab name
General
Connectivity
Security
Groups
If you change a configuration setting for the Access Server, you must stop and
restart the Access Server for the changes to take effect.
To configure the Access Server
1
In the Access Server Manager, on the Edit menu, click Preferences.
2
In the Preferences window, select a tab and make the appropriate
configuration changes.
3
When you are finished, click OK to close the Preferences window.
Symantec pcAnywhere Access Server automatically uses the name of the computer
on which it is installed. The Access Server name is the display name of the Access
Server. This name is used to identify the Access Server in the host list on the
Symantec Management Console. You can use a custom name to make it easier for
users to find the Access Server.
See
"Configuring the Access Server"
Note: Changing the Access Server name does not affect the computer name.
Description
Lets you specify a name for the Access Server and set the
launch options.
Lets you select custom ports, if necessary, and change the
modem configuration settings. You can also specify any IP
addresses or subnets that you want to prevent from docking
to the Access Server.
Lets you set the Access Server security options. You can
change the user password and set an administrator password
to control access to the Access Server configuration settings.
You can hide the Access Server from TCP/IP searches to
prevent it from being displayed in the host list in the
Symantec Management Console. You can also specify where
to log Access Server events.
Lets you set up and maintain host groups to control access
to the Access Server and simplify the management of docked
hosts.
on page 50.
Managing Access Server
Naming the Access Server
51
Advertisement
Table of Contents
