Table of Contents
Advertisement
58
Managing Access Server
Connecting to a host through the Access Server
Connecting to a host through the Access Server
See
"About hosts docked to the Access Server"
To dock a pcAnywhere host to the Access Server
1
In the Symantec Management Console, in the Settings menu, click All
Settings.
2
In the left pane, expand the Settings > Remote Management > pcAnywhere
folders.
3
Click the pcAnywhere Settings policy for your platform.
4
In the right pane, click the Access Server tab.
5
Check Dock to pcAnywhere Access Server.
6
Enter the credentials for the Access Server.
7
(Optional) If you want to also connect directly to a group on the Access Server,
check Connect to a group.
If you don t select a group, the host connects as a member of the default group
on the Access Server.
8
(Optional) Enter the credentials for the group.
9
In the upper right corner, ensure that the policy is On.
10
Click Save changes.
Before you connect to a host through an Access Server, those hosts must be
configured to be docked to the Access Server.
A single host can be configured to dock to the Access Server or a direct TCP/IP
standard connection. You cannot configure a specific host to simultaneously dock
to both an Access Server and a TCP/IP connection. If you want to change this
functionality, you must distribute an updated policy.
Each instance of an Access Server installation can support up to 1,000 docked
hosts and 30 concurrent remote control sessions.
See
"How the Access Server works"
See
"Manually connecting to a host computer"
To connect to a host through the Access Server
1
In the Symantec Management Console, in the Actions menu, click Remote
Control.
2
In the Computer box, enter the computer name or IP address of the Access
Server that your host is docked to.
on page 57.
on page 42.
on page 59.
Advertisement
Table of Contents
