Symantec ALTIRIS WORKFLOW 7.0 - INSTALLATION AND CONFIGURATION GUIDE V1.0 Configuration Manual page 32

32 Installing Workflow 7.0
Installing Process Manager
To install Process Manager
1 Run the Workflow Solution Setup file.
The installer is located in the directory to which you downloaded it. By default
the Workflow installer is downloaded to the desktop. If you have not yet
downloaded the Workflow installer, you can download it through the Symantec
Management Console.
See Downloading the Workflow installer through the Symantec Management
Console " on page 22.
2
In the Server Roles step, click the pieces of Workflow 7.0 that you want to
install on the local computer, and then click Next.
See About Workflow 7.0"
If you want to install only Process Manager, select only that piece. The
installation steps on the left are affected by the options that you choose. The
more options you select on the right, the more steps you will have on the left.
If you want to install the Process Manager Database and the Process Manager
Portal on the same computer, select both of them and click Next. You should
always click Process Manager Portal Core if you are installing Process
Manager.
You should always click Workflow Server and background processing unless
you have a specific reason for not doing so.
Clicking Show Advanced Settings During Installation lets you edit the default
installation location, database replication, advanced cube reporting, system
accounts access (ASPNET, Network Service), and ORM settings.
3 On the Server Configuration step, select which Website and base URL you
want Process Manager to use.
Base URL refers to a resolvable URL to access the Workflow Server. If you
are installing on a design-only computer (not a publishing server), the base
URL can be the local computer name or IP address. If you are installing on a
publishing server with an externally accessible URL, use that URL.
4 On the Notification Server Credentials step, configure the Notification Server
options.
Contact your network administrator if you need help.
5 On the Database Connection step, configure a connection to a Process
Manager database.
6
On the Database Configuration step, configure whether you are installing a
new database or updating an existing database.
on page 9.