Symantec ALTIRIS WORKFLOW 7.0 - INSTALLATION AND CONFIGURATION GUIDE V1.0 Configuration Manual page 16

16 About Workflow 7.0 and installation
About installing Workflow 7.0
Step Action
Step 2 Backup the Ensemble database
Step 3 Install Workflow 7.0 on a testing
computer
Step 4 Revise your projects
Step 5 Publish revised projects to
Workflow 7.0 computer
Step 6 Test revised projects
Process for upgrading currently-running processes (continued)
Table 1-6
Description
Create a backup of your Ensemble database. Store the database
backup on a safe directory.
Install Workflow 7.0 on a testing computer.
See Installing Workflow for the first time"
If you already have a testing computer setup up with Workflow
7.0, you do not need to set up another one.
While you are installing on your testing computer, make sure
you do the following:
Use the same Workflow persistence settings as your Workflow
6.5 configuration.
If you do not know what persistence setting you are using in
Workflow 6.5, see the following section:
See Determining a project's persistence setting"
If you are using a persistence setting that is not supported by
Workflow 7.0, see the following section:
See Versioning a process"
Set Workflow 7.0 to have access to a Symantec Management
Platform 7.0 server (NS 7).
Open each project and make the necessary changes for it to be
compatible with Workflow 7.0 and Symantec Management
Platform 7.0. Change any old Notification Server components
and settings.
If you can use the same persistence setting for your Workflow
7.0 projects as you used for your Workflow 6.5 projects.
See Determining a project's persistence setting"
Publish the revised projects to the Workflow 7.0 computer. For
more information on publishing projects, see the Workflow 7.0
User's Guide.
Conduct thorough tests to ensure that your projects are working
properly in a Workflow 7.0 and Symantec Management Platform
7.0 environment. If you encounter any problems, fix the project
and republish.
on page 14.
on page 17.
on page 19.
on page 17.