Symantec ALTIRIS WORKFLOW 7.0 - INSTALLATION AND CONFIGURATION GUIDE V1.0 Configuration Manual page 17

Step Action
Step 7 Install Workflow 7.0 on
production computer
Step 8 Publish revised projects to
production computer
Persistence option
LogicBase.Components.Ensemble.WSWorkQueue
Process for upgrading currently-running processes (continued)
Table 1-6
Determining a project's persistence setting
Persistence refers to how a running process is stored in memory to improve the
performance of Workflow 7.0. Persistence is set at the project level, but most
projects use the default setting that was set when Workflow was installed (almost
always file-based). For Workflow 6.5 projects, the persistence setting is configured
under the project's Publishing data tab in the Work Queue Service Name property.
The best way to determine a project's persistence setting is to open the project
and look at its Work Queue Service Name property under the Publishing data
tab.
For more information on data tabs, see the Workflow 7.0 User's Guide.
The following table describes persistence options:
Persistence options
Table 1-7
Description
Install Workflow 7.0 on your production computer. When you
install, make sure you use the same persistence setting as you
6.5 configuration.
See Installing Workflow Server"
See Installing Workflow Designer"
Publish all of your revised projects to the Workflow 7.0
production computer. For more information on publishing
projects, see the Workflow 7.0 User's Guide.
Description
Uses Ensemble SQL database settings. The workflow
project uses the Ensemble database for persistence.
There is no Workflow 7.0 equivalent of this setting.
About Workflow 7.0 and installation
About installing Workflow 7.0
on page 27.
on page 29.
17