Symantec ALTIRIS INVENTORY SOLUTION 7.0 SP2 - V1.0 Manual page 126

126 Gathering baseline inventory
Registry Configuration Editor options
Registry Configuration Editor options
Table 9-5
Tab Setting
Include Keys
Root
Launch Registry Editor
Report if this key is
Exclude Keys
Root
Launch Registry Editor
Description
Select this tab to specify the registry
keys to be included in the scan. The
number of registry keys in the original
baseline configuration affects the run
time of baseline snapshot scans.
From the Root drop-down list, select
the root for the key and enter a key in
the field. For example, if you select
HKEY_CURRENT_CONFIG from the
Root drop-down list, if you enter DATA
in the field, and when you click Add key,
KEY_CURRENT_CONFIG/DATA is
added to the Include Keys list.
Click this option to open the Registry
Editor to copy the key name instead of
typing it. Either regedit32.exe or
regedit.exe opens.
These settings are used during the
compliance scan. They specify the
conditions that are required for a
registry key to be reported in the
compliance scan output. Select Added,
Deleted, or Modified, or any
combination.
Select this tab to specify the registry
keys to be excluded from the scan.
From the Root drop-down list, select
the root for the key and enter a key in
the field. Example: If you select
HKEY_CURRENT_CONFIG from the
Root drop-down list, if you enter DATA
in the field, and when you click Add key,
KEY_CURRENT_CONFIG/DATA is
added to the Include Keys list.
Click this option to open the Registry
Editor to copy the key name instead of
typing it. Either regedit32.exe or
regedit.exe opens.