Symantec ALTIRIS INVENTORY SOLUTION 7.0 SP2 - V1.0 Manual page 116

116 Gathering baseline inventory
File Configuration Editor dialog box
File Configuration Editor options (continued)
Table 9-2
Tab Setting
Directories
Scan all local drives
Scan only these directories
When scanning for
compliance relative to this
baseline
Scan the same directories as
listed
Scan all local drives
Directory
Description
You can select this tab to specify the
directories to scan for a baseline
snapshot. It checks whether the
compliance scan uses the same
directories as the baseline scan. When
you specify directories, you can use
environment variables. Enclose the
variables in % characters. Example:
%TEMP%. These settings are used
during the baseline snapshot scan.
You can select this option to perform
the baseline snapshot scan on all local
drives.
You can select this option to specify the
directories for performing baseline
snapshot scan. Browse for the directory
and click ADD to add a directory to the
Include these directories list. The scan
includes any subdirectories of the
specified directories. Click Remove to
remove a directory from the Include
the directories list.
These settings are used during the
compliance scan.
You can select this option to perform
the compliance scan on the same
directories that are listed in the
baseline scan.
You can select this option to perform
the compliance scan on all the local
drives, regardless of what the baseline
scan checked.