Cisco AP541N-A-K9 Administration Manual page 85

Wireless
Modifying Advanced Settings
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Different settings display depending on the mode you select.
the fields and configuration options for the Advanced Settings page.
Table 19 Advanced Settings Field Descriptions
Field Description
Specify whether you want the wireless radio on or off by
Status (On/Off)
clicking On or Off.
If you turn off a wireless radio, the access point sends
disassociation frames to all the wireless clients it was
supporting so that the wireless radio can be gracefully
shutdown and the clients can start the association process
with other available access points.
NOTE:
edited.
The Mode defines the Physical Layer (PHY) standard used
Mode
by the wireless radio.
NOTE:
on the country code setting.
Select one of the following modes for the wireless radio
interface:
If Status is set to Off, then all fields are not able to be
The modes available on your access point depend
• 802. 1 1a
• 802. 1 1b/g
• 802. 1 1a/n
• 802. 1 1b/g/n
• 5 GHz 802. 1 1n
• 2.4 GHz 802. 1 1n
4
Table 19 describes
82