Cisco AP541N-A-K9 Administration Manual page 138

6
135
Table 34 Management ACL
Field
Management ACL
Mode
IP Address (1–5)
Creating an Administration Access Control List
Description
Enable or disable the management ACL feature. At least
one IPv4 address should be configured before enabling
Management ACL Mode. If enabled, only the IP
addresses you specify will have Web, Telnet, SSH and
SNMP access to the management interface.
Enter up to five IPv4 addresses that are allowed
management access to the access point. Use dotted-
decimal format (for example, 192.168.10.100).
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Administration