Cisco AP541N-A-K9 Administration Manual page 142

7
139
Table 35 Access Points in the Cluster
Field
Location
MAC Address
IP Address
Table 36 describes the cluster information to configure for a member.
Table 36 Clustering Options
Field
Location
Description
Description of where the access point is physically
located.
Media Access Control (MAC) address of the access
point.
The address shown here is the MAC address for the
bridge (br0). This is the address by which the access
point is known externally to other networks.
The IP address for the access point.
Each IP address is a link to the Administration Web
pages for that access point. You can use the links to
navigate to the Administration Web pages for a
specific access point. This is useful for viewing data
on a specific access point to make sure a cluster
member is picking up cluster configuration changes,
to configure advanced settings on a particular
access point, or to switch a standalone access point
to cluster mode.
Description
Enter a description of where the access point is
physically located. The location can be a maximum of 64
characters in length. All alphanumeric characters except
double quote (") are valid. Null or empty space is not
allowed.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Clustering Multiple Access Points
Managing Access Points in the Cluster