Cisco AP541N-A-K9 Administration Manual page 122

6
NOTE
119
Table 30 Administrator Page
Field Description
Enter the name of the administrator. You can use up to 64
Administrator
Name alphanumeric and symbols characters. [ASCII values 32 to 126
excluding double quote(")].
Enter the e-mail address or phone number of the person to
Administrator
Contact contact regarding issues related to the access point. You can
use up to 255 alphanumeric and symbols characters. (ASCII
values 32 to 126 excluding double quote.)
Enter the physical location of the access point, for example
Access Point
Location Conference Room A. You can use up to 255 alphanumeric and
symbols characters. (ASCII values 32 to 126 excluding double
quote.)
Enter the current administrator password. You must correctly
Current
Password enter the current password before you are able to change it.
Enter a new administrator password. The characters you enter
New Password
are displayed as bullet characters to prevent others from
seeing your password as you type.
The administrator password must be an alphanumeric string of
up to 8 characters. Do not use special characters or spaces.
Re-enter the new administrator password to confirm that you
Confirm New
Password typed it as intended.
After you configure the settings on the Administrator page, you must click Apply to
apply the changes and to save the settings. Changing some settings might cause
the access point to stop and restart system processes. If this happens, wireless
clients will temporarily lose connectivity. We recommend that you change access
point settings when WLAN traffic is low.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Administration
Administrator