Factory Settings and Technical
A.
Specifications
Restoring Factory Settings
You can use the Restore Factory Settings button to restore default settings or to change the
language (see
return the adapter to its original firmware and settings. (See
Original Firmware and Factory Settings
Figure 1. Restore Factory Settings button
To restore the adapter to its default settings:
This procedure erases the security code for your adapter. After you
Note:
do this, you will have to set up the adapter again to work with your
TV and your laptop as described in the installation guide.
Turn on the adapter.
1.
Wait until the LED turns amber and the TV screen shows Ready for Connection.
2.
Press and hold the Restore Factory Settings button for more than 5 seconds until the LED
3.
on the front starts blinking.
Release the Restore Factory Settings button.
4.
The adapter returns to its factory settings.
Changing the Display Language
Restore Factory Settings button
Appendix A. Factory Settings and Technical Specifications
on page 10). You can also use this button to
Returning the Adapter to Its
on page 18.)
A
| 24