Table of Contents
Advertisement
Adapter Properties
Select the Adapter tab to display this screen:
Adapter name. This is either the default
•
name or the name you choose in the
initial set up process. It is okay to change
the name at any time. Just type a new
name. If the default name is deleted and
the Name field is left empty, the
application restores the name to the
previous value.
The valid character set for adapter
names includes upper-case and
lower-case letters A through Z, numbers,
and punctuation marks, also defined as
ASCII characters 32 through 126.
Network address. This is the IP (Internet
•
Protocol) address.
Adapter ID. A preset and unchangeable number set by the adapter.
•
Adapter manufacturer. NETGEAR.
•
Adapter model. This is the model of the adapter currently connected.
•
Adapter hardware version. The version of the current hardware.
•
Adapter firmware version. The version of the application. If a Web update is required,
•
click the Update Available button.
Automatically connect. Allows this adapter to be set as the auto-connect adapter. See
•
Setting Up Autoconnect
Register. Register your adapter to obtain support and get the latest software updates.
•
Audio/Visual Tuning. See
•
page 13.
Resizing the TV Picture
If the laptop display is cropped or not filling the entire TV screen, the image needs to be
adjusted. To adjust the TV image click the Properties button. On the Adapter properties
screen click the Resize TV picture button. On the next screen, click the plus icon to increase
the size, or the minus icon to decrease the size. When the image is correct, click OK to return
to the previous screen. If the image still does not fit the entire TV screen, try adjusting the TV
settings.
12 |
Chapter 2. Wireless Display Settings
Push2TV HD TV Adapter for Intel® Wireless Display User Manual
on page 13 for more details.
Resizing the TV Picture
on page 12 and
Testing the Audio
on
Advertisement
Table of Contents
