[Advanced Func.] Page; [Xml Notification] Tab; [Face Detection] Tab - Panasonic WJ-GXE500 Operating Instructions Manual

[Advanced func.] page

[XML notification] tab

Refer to page 28 for general information about this tab.
Setup items
XML notification *1
Destination setting for
XML notification
*1 • W hen "D1" is selected for "Image capture mode", it is impossible to activate the XML notification function.
*2 • W hen "On" is selected, face detection information is notified to the designated destination server in the
XML format.
*3 • T he following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10 669, 10 670

[Face detection] tab

Refer to page 28 for general information about this tab.
Setup items
Face detection
Important:
• W hen "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab and "On" is
selected for "Priority stream" on the [System] tab, it may sometimes be impossible to display the face detection
setup window.
*1 • T he face detection function shall not guarantee the detection of faces in an image. The face detection
accuracy varies with imaging conditions.
*2 • W hen "Mosaic" is selected for "Display type" of "Privacy zone", the face detection function may some-
times be triggered (the face detection frame will be displayed).
*3 • W hen "D1" is selected for "Image capture mode", it is impossible to activate the face detection function.
*4 • Face detection is available on Ch1 only.
XML notification *2
Notification interval
Destination1 - 2 Destination address
Destination port number *3
Destination path name
User name
Password
Face detection *1 *2 *3 *4
XML notification
Setting values
(Underlined: default)
On/Off
1s/2s
(Default: None (blank))
1 - 65535
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
(Default: None (blank))
Setting values (Underlined: default)
On/Off
49