Panasonic WJ-GXE500 Operating Instructions Manual page 43

*3 • S elect "On" or "Off" to determine whether or not to apply the VD2 synchronization method for the con-
nected camera. When a camera not supporting the VD2 synchronization method is connected, select
"Off" for "VD2".
*4 • S elect "On" to control cameras with the coaxial communication.
*6 • I t is possible to compensate for the video signal transmission loss from the camera.
*7 • T he following cable length settings are references when using RG-59/U, BELDEN 9259 (for NTSC mod-
els), 5C-2V (for PAL models) or equivalent cables.
S: Less than 400 m {1 300 ft.}
M: 400 m {1 300 ft.} to 700 m {2 300 ft.}
L: 700 m {2 300 ft.} to 1 200 m {4 000 ft.}
*8 • W hen cameras with the different RS-485 protocols (for example, cameras manufactured by Panasonic
and those manufactured by Pelco, Inc.) in the same RS-485 communication line, the cameras will not
work correctly.
*9 • Select the communication protocol that is compliant with the specifications of the connected cameras.
*10 • Refer to the readme file on the provided CD-ROM for further information about the RS-485 command
table.
*11 • S elect "On" to control cameras with the RS-485 communication.
*12 • S et the value in accordance with the RS-485 command table. Refer to the readme file on the provided
CD-ROM for further details.
43