When Other Panasonic Products Respond To This Remote Control; Television Operation - Panasonic DMR-E55S Operating Instructions Manual

Television operation

You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.
Point the remote control at the television
While pressing [Í TV], enter the code
with the numbered buttons.
e.g., 01: [0] [1]
Manufacturer and Code No.
Brand
Panasonic/National
GOLDSTAR/LG
HITACHI
JVC
MITSUBISHI
NEC
PHILIPS
SAMSUNG
SANYO
SHARP
SONY
TOSHIBA
Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
≥If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
Code
01, 02, 03, 04
15, 16
08
07
09, 10
13
12
12, 17, 18
14, 19
11
05
06
When other Panasonic products
respond to this remote control
If other Panasonic products are placed close together, change the
remote control code on the main unit and the remote control (the
two must match).
Under normal circumstances use the factory set code "DVD 1".
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select
"SETUP" and press [ENTER].
3
Press [3, 4] to select "Others" and
press [1].
4
Press [3, 4] to select "Remote
Control" and press [ENTER].
5
Press [3, 4] to select the code
("DVD 1", "DVD 2" or "DVD 3") and
press [ENTER].
Remote Control
SETUP
Press "±" and "ENTER" together
for more than 2 seconds on the remote
Tuning
control.
Others
Disc
6
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
7
Press [ENTER].
∫ When the following indicator appears on the
unit's display
Change the code on the remote control to match the main unit's
( step 6).
[Note]
Executing "Shipping Condition" in the SETUP menu returns the
main unit code to "DVD 1". Change the remote control code to 1
( step 6).
The unit's remote
control code
RQT7444
11