When Other Panasonic Products Respond To This Remote Control - Panasonic Diga DMR-T6070 Operating Instructions Manual

When other Panasonic products
respond to this remote control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
Use "1", the factory set code, under normal circumstances.
1
Press [SETUP].
2
Press [3, 4] to select "Set Up" and
press [1].
3
Press [3, 4] to select "Remote
Control Code" and press [ENTER].
4
Press [3, 4] to select the code (1, 2,
or 3) and press [ENTER].
Remote Control Code
SETUP
Pres s " ± " and "ENTER" together
Channel
for more than 2 seconds on the remote.
Set Up
Disc
5
To change the code on the remote control
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
6
Press [ENTER].
∫ When the following indicator appears on the
unit's display
The unit's remote control code
Change the code on the remote control to match the main unit's
( step 5).
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
RQT7559
13