Table of Contents
Advertisement
Changing the unit's settings
Tabs
PLAY k1.3 & Audio during Search
Sound
You may hear sound regardless of this setting with some discs.
Dynamic Range Compression (Dolby Digital only)
Change the dynamic range for late night viewing.
Bilingual Audio Selection [DVD-R]
Select whether to record the main or secondary audio type
when recording to DVD-R.
You cannot select this when recording from an external source
onto DVD-R. Select the audio on the other equipment.
Digital Audio Output
Change the settings when you have connected equipment through this unit's DIGITAL AUDIO OUT terminal ( page 8).
≥Press [ENTER] to show the following settings.
PCM Down Conversion
Select how to output audio with a sampling frequency of 96
kHz or 88.2 kHz.
≥Signals are converted to 48 kHz or 44.1 kHz despite the
above settings if the signals have a sampling frequency
of over 96 kHz or 88.2 kHz, or the disc has copy
protection.
Dolby Digital Select how to output the signal, to output
DTS
MPEG
Display
On-Screen Messages
Choose whether to show status messages automatically.
Grey Background
Select "Off" if you do not want to have the unit show the grey
background when reception is weak.
FL Display
Changes the brightness of the unit's display.
This setting is fixed with "Automatic" if you set "Power Save" to
"On".
RQT7444
36
Menus
"Bitstream" so the connected equipment
decodes the signal, or to decode on this
unit and output the signal as "PCM" (2
channel).
[Note]
Not making the proper settings may result
in noise, possibly damage your hearing
and speakers, and digital recording may
not work properly.
Options (Underlined items are the factory presets.)
≥On: Audio is heard during first level search forward.
≥Off: Audio is not heard during search. Quick View ( page 21)
does not work.
≥On
≥Off
≥M 1
≥M 2
≥On: Signals are converted to 48 kHz or 44.1 kHz. (Choose
when the connected equipment cannot process signals
with a sampling frequency of 96 kHz or 88.2 kHz.)
≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose when
the connected equipment can process signals with a
sampling frequency of 96 kHz or 88.2 kHz.)
≥Bitstream: When connecting to equipment displaying the
Dolby Digital logo.
≥PCM: When connecting to equipment not displaying the Dolby
Digital logo.
≥Bitstream: When connecting to equipment displaying the DTS
logo.
≥PCM: When connecting to equipment not displaying the DTS
logo.
≥Bitstream:
When connected to equipment with a built-in
MPEG decoder.
≥PCM: When connected to equipment without a built-in MPEG
decoder.
≥Automatic
≥Off
≥On
≥Off
≥Bright
≥Dim
≥Automatic: The display turns dark during play, and reappears
momentarily if a button is pressed. When the unit
is turned off all displays disappear. While using this
mode the standby power consumption can be
reduced.
Hide quick links:
Advertisement
Table of Contents
