Lubrication Schedule; General; Lubrication - Dixon 44/968999538, 44/968999547, 44/968999611, 42/968999689, 42/968999713, 36/968999539, 36/968999609 Operator's Manual

Lubrication Schedule

12/12 Every year
Lubricate with grease gun
1/52 Every Week
1/365 Every day
*Change transaxles (transmission) filters.

General

Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it must be filled with engine oil.
When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulfide grease.
For daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen,
attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other
petroleum products must not be used to clean belts.
48-
DIXON

LUBRICATION

Oil change
Filter change
Lubricate with oil can
Level check
8011-672-3