Blade Switch; Circuit Breaker; Parking Brake - Dixon 44/968999538, 44/968999547, 44/968999611, 42/968999689, 42/968999713, 36/968999539, 36/968999609 Operator's Manual

Blade Switch

In order to engage the mower deck, pull the knob out;
the mower blades are disengaged when the knob is
depressed.

Circuit Breaker

The circuit breaker provides protection for the electrical
system by (1) 15 amp circuit breaker. If the circuit
breaker trips, push the button to reset. If the condition
repeats, consult a dealer for inspection and repair.

Parking Brake

The parking brake is found on the operator's left. Pull
the lever upward to activate the brake and downward
to release it.
The park brake is designed to hold the mower from
moving and is not intended for use in stopping the
mower while it is in motion. The engine will stop if the
park brake is engaged while the control levers are in
the drive position.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release
the parking brake before moving the mower.
22-
DIXON
CONTROLS
Blade switch
Circuit breaker
Engaged parking brake
8050-816
8050-816
8050-823