Dixon ZEETER 422 & 424 Operator's Manual

Dixon zero turn riding mower operator's manual
Hide thumbs Also See for ZEETER 422 & 424:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Dixon ZEETER 422 & 424

  • Page 2: One-Year Limited Warranty

    ONE-YEAR LIMITED WARRANTY This lawn mower is warranted for one (1) year from date of delivery against all defects in materials and workmanship. Lawn mowers used for commercial service are warranted for 30 days from date of delivery. (Lawn mowers other than those used only at residence of owner are considered as commercial service.)
  • Page 3: Serial Numbers

    9. When the mower is not in use, turn the engine off; never leave the engine running unattended. Your Dixon mower is equipped with a weight- sensitive switch that kills the en gine when operator leaves the seat while blades are engaged.
  • Page 4 IMPORTANT OPERATING INSTRUCTIONS Dixon ZTR mowers offer a new concept in mowing, providing unique maneuverability and ease. The following procedures will allow one to become familiar with the unique method of control very easily. 1. SET PARKING BRAKE — Be sure that drive levers are free and in the neutral position.
  • Page 5: Maintenance

    ALWAYS DISENGAGE BLADE OPERATION BEFORE DISMOUNTING. 9. Parking Brake: Parking brake is on right hand side of floor area and is engaged by pushing full forward with foot. To disengage, pull lever back toward operator by hand. In emergency situations, brake may be used in conjunction with the natural braking of the transaxle by applying pressure with foot.
  • Page 6 BODY REMOVAL A. ZTR-424 Body Removal 1. Disconnect throttle cable from engine. 2. Disconnect key switch wire loom from frame wire loom at front of body. 3. Disconnect seat switch wire loom from frame wire loom. This connection located approximately level with the back of the seat on left hand side of frame under the body.
  • Page 7 9. Connect pan wire loom plug to plug on frame wire loom. Mower will not start unless this connection is made. TRANSAXLE For adjustment or repair confer with authorized Dixon dealer service department. Adjustment or repair by other than authorized dealer voids warranty. SPARE PARTS See your dealer for ordering spare parts or warranty service.
  • Page 10 TRANSAXLE ASSEMBLY 5000-102...
  • Page 11 TRANSAXLE ASSEMBLY 5000...
  • Page 13 4007 12 Volt Battery 4008 Solenoid 4009 Wire Clip (not shown) 4010 Control Decal, ZTR-424 4011-1 Name Decal, DIXON 4014 Seat - ZTR-422 4014A Seat Assembly, ZTR-422 (includes 4054) 4022 Ground Terminal ZTR-421/424 4024A Headlight Ground Wire, ZTR-421/424 4025 Switch Decal, ZTR-424...
  • Page 14 Part No. Name Part No. 4051 Body, ZTR-422 5014 Torque Rod 4054 Seat Switch Assembly, ZTR-422 5015 24 T Sprocket 4058 Arm Rest Bracket R, ZTR-424 5016 Moulded Cone (each) 4059 Arm Rest Bracket L, ZTR-424 5018 9 T Sprocket - Narrow 4060 Arm Rest 5019...
  • Page 15: Owner Information

    OWNER INFORMATION Date Mower Purchased___________________Mower Model Number ___________________ Mower Purchased from ________________________________________________________ Mower Serial Number_____________________Transaxle Serial Number _________________ Oil changed this date: 1. ____________________________ 2. ______________________________ 3. ______________________________ Engine tuned this date: 1. ____________________________ 2. ______________________________ dealer name & address 4.
  • Page 16 Form No. 4089-1279 Litho in U.S.A. ® DIXON and ZTR are registered trademarks of Dixon Industries, Inc.

This manual is also suitable for:

Ztr 422, 424Ztr zeeter 424Ztr zeeter 422

Table of Contents