Dixon 2700 Operator's Manual page 37

CARE AND MAINTENANCE
STEERING CONTROL ADJUSTMENTS
(continued):
To adjust "In" position of the steering controls
1. Move the levers inboard to the operating position.
2. Adjust the steering lever stops until the steering
levers have the desired clearance.
To adjust for straight forward tracking.
1. Drive tractor with both control levers in the full forward
position.
2. Stop the machine and shut off the engine.
3. Adjust the forward stop of the control levers on the
side which appears to be faster to limit the forward
travel of the control levers until the mower tracks in
a straight line.
Note: Variations in the turf and tire pressure can
cause variations in speed and tracking.
When all alignment adjustments are satisfactory, slide
the hold down plate and bellows down the control
levers and secure with screws.
37