Specifications - Dixon 2700 Operator's Manual

CHASSIS:
S E A T :
MOWER DECK:
BLADE DRIVE:
DRIVE SYSTEM:
ENGINE:
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
TIRES:
RECOMMENDED
TIRE PRESSURE:
CAPACITIES:
DIMENSIONS:
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
14

SPECIFICATIONS

Model 2700
11 GA - rectangular tube, 7 GA reinforcement
Designed for operator comfort with padded back & arm
rests. Seat is adjustable fore & aft. Mounted on operator
suspension system.
2 decks are available. Both decks are made of 10 GA
fabricated welded construction with 1/4 " reinforcement
plate. 3 blades combine for either a 60" or 72" cut width.
Deep deck with discharge tunnel. Cut height approximately 1.5"
to 6" via 10 position lift handle.
"V" Belt with Electric clutch
Each rear wheel is independently driven by a HydroGear
BDP-10A pump and White CE wheel motor.
27HP Kawasaki Twin, Liquid Cooled 4-Cycle, V-
Configuration, Overhead Valve, Gasoline, Horizontal
Shaft, Aluminum Head and Crankcase with Cast Iron
Liners, Full Pressure Lubrication/Full Flow Filter, Electric
Fuel Pump, Fixed Jet Carburetor, Electronic Ignition, In-
Line Fuel Filter, Dual Element Air Cleaner.
parking brake, blade drive clutch and control levers.
Front 13-6.5x6
Rear 23-10.5x12
Front 16-20 lbs.
Rear 8-14 lbs.
Fuel - 11 gallons (approx)
Hydrostat oil system - 4 quart with in-line 40 micron filter
Hydrostat oil recommendation - SAE 20W50 motor oil
Engine - 2 quart. SAE 10W30 motor oil
Width 73.5"(60" Deck), 85.5"(72" Deck)
Height 54"
Length 87"
Weight 1020 lbs.(60" Deck), 1054 lbs.(72" Deck)