Dixon 2700 Operator's Manual page 33

CARE AND MAINTENANCE
HEADLIGHT ADJUSTMENT
1. Loosen the 1/2" retaining nut underneath the
headlight and slide the headlight forward out of the
recessed area of the fuel tank.
2. Loosen the 1/2" nut on the "U" shaped holding
bracket and swivel the headlight vertically to adjust
the height of the beam. Tighten the bracket nut.
3. Replace headlight into recessed area of the fuel
tank.
4. Swivel the headlight horizontally to illuminate the
desired area and tighten the headlight retaining
nut.
33