Fitting The Proximity Switch; Connecting The Machine Head - DURKOPP ADLER M-TYPE 867 Instruction Manual

6.7

Fitting the proximity switch

6.8

Connecting the machine head

24
2
–
Push the proximity switch 2 onto the handwheel flange so that the
retaining pin 1 on the belt guard engages in its groove.
–
Secure the proximity switch with the two screws.
Connections
–
The 9870 367004 or 9870 867000 cable is plugged onto the
9850 867000 distributor in the upper part and passed down inside
the upper part.
–
Plug the 37-pole plug of the cable into socket A of the sewing
drive and secure with the screw.
1