Kenmore 3700 - Bagless Upright Vacuum Owner's Manual page 14

Secure by aligning
in the base siots_
To reattach nozzle
guard, rotate/pivot
back into position,
A
To secure nozzle
guard, rotate lock B
counterclockwise to
the locked position,
Slide lock A to the
right to the locked
position
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning
the unit. Failure to do so could
result in electrical shock or
personal injury from vacuum
cleaner suddenly starting.
, i i
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet,
2. Press handle release pedal and lay
vacuum cleaner back,
3. Remove the two
(2) screws from the
lens cover,
4. Lift the lens cover
to remove,
Do not use a bulb rated over 9W
(13V). During extended use, heat
from the bulb could overheat
surrounding plastic parts.
i i , ,11111,111,1 iii i
5. Pull bulb out of
socket_ Do NOT
twisL Gently push
bulb into socket to
replace.
6. Snap lens cover
back into place and
secure the headlight
lens by replacing the
two screws,
Note: See separate PARTS LIST for bulb
number,
!4