Light Bulb - Kenmore 3693 - Progressive Bagless Upright Owner's Manual

WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could result in
electrical shock or personal injury
from the vacuum cleaner suddenly
starting.
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical
outlet.
Flat 2. Press han-
dle release
pedal and lay
vacuum clean-
er back.
3. Pry light
lens out at
slots as shown
Headlight on both sides.
Lena Rotate lens up
and lift off.
CAUTION
Do not use a bulb rated over 9W (13V).
During extended use, heat from the
bulb could overheat surrounding plas-
tic parts,
4. Remove the light
bulb by pulling
straight out.
5. Carefully insert _;
new light bulb fully _:_
into slot.
Note: See PARTS AND FEATURES for
bulb number.
CAUTION
Do not plug in or turn on until the vacu-
um cleaner is completely reassembled,
6. To replace light
lens, place tab at
front of lens into
slot. Rotate lens
down and firmly
snap into place.
19