Connecting Your Vcr To The System - Bose Lifestyle 18 Series II Installation Manual

Installation guide
Hide thumbs Also See for Lifestyle 18 Series II:
Table of Contents

Advertisement

Connecting your VCR to the system

Figure 21
VCR connection
F
F
IN
OUT
VCR
The rear panel of the media center provides audio and video connections for your VCR.
Note: If you have already used the video and audio cables supplied with your LIFESTYLE
system, or your VCR does not provide any, you need to purchase additional cables. Contact
your local electronics store or authorized Bose
Most VCRs have a Composite video output, which is the type of connection explained below.
Follow these steps to make the VCR connections:
1. Using audio cables, connect the left (L) and right (R) audio outputs on your VCR to the L
and R VCR Audio IN jacks on the media center rear panel.
2. Using a video cable, connect the VCR (Video OUT) to the media center (Composite Video
IN). Then use another cable to connect the media center (Composite Video OUT) to the
TV.
TV
You can use an S-Video cable to connect the media center (Video OUT) to your TV, for higher
DVD picture quality. The composite connection made in Step 2 above will pass the VCR
video to the TV. Remember to select the proper TV input when you change from watching
video tapes to DVDs and vice versa.
If your media center is connected to the TV using the Component video adapter, you cannot
connect a VCR to the media center. Connect it directly to another input on the TV and select
that input on the TV to watch videotapes.
®
dealer.
Cable TV, satellite,
or antenna cable
The media center
may also be con-
nected to a different
input on the TV using
an S-Video cable.
Reference
®
25

Advertisement

Table of Contents
loading

Table of Contents