Connecting Your Vcr To The System (Optional) - Bose LifeStyle DVD Entertainment System Operating Manual

Component video adapter
connections
To make component video connections, you will need video-grade cables for the Y, Pb,
and Pr jacks and the osea component video adapter (Figure 13)* This adapter plugs into the
S-VIDEO and ~~~~~~IT~ outputs Your system will
correct signals to these jacks
when you change the video output setting to YPbPr Ll~~~~~~ 28/35 system
operaling guide for instructions on how to change sy ings.
: Componenf video jacks are often color-coded and it is essential that you match the
color-coded connections with fhe cables.
Media Center
Comsonent video adanter
Pr
(Red)
Y
(Green)
Pb (Blue)
The type of video connection used with your TV must match the type of connection used with
your VCR, if you choose to connect it tu the system. If you connected your TV to the COM-
ITE VIDEO QUT~UT, connect your VCR output to the COMP SITE VIDEO INRJT. If you
connected your TV to the ~-Vl~~~ OUTPUT, connect your VGR to the ~-Vl~~~ INPUT. If
your VCR does not have an ~-Vl~~~ output, you may be able to connect your VCR compos-
ite video autput directly to your T%
a If your VCR did not come vvifh the slereo audio and video cables required to connect it
r LIFESTYLP sysfem, confacf your local electronics store or authorized Bose dealer.
The rear panel of the media center ~r~vi~es audio and video connections for your VCR.
1~ Using the supplied st dia cable, connect the left (L) and right (R) audio outputs on
the rear panel of your o the k and R VCR audio inputs on the rear panel of the
media center.
2. Using the supplied video cable, connect the ~~M~~ ITE video input on the rear panel of
the mectia center to the VI EO OUT on the rear panel of your VCR.
." You should not connect the video output of your LIFESTYLE@ system to a VCR, since
playing copy-protected DVDs may result in poor picture quality
Media center-to-VCR video
and audio connections
16
To make component video connections, you will need video-grade cables for the Y, Pb,
and Pr jacks and the Bose® component video adapter (Figure 13). This adapter plugs into the
S-VIDEO and COMPOSITE outputs. Your system will send the correct signals to these jacks
when you change the video output setting to YPbPr. See your UFESTYLEFJ 28/35 system
operating guide for instructions on how to change system settings.
) N@te:
Component video jacks are often color-coded and it is essential that you match the
color-coded connections with the cables.
Figure 13
Component0deoadapmr
connections
Media Center
S-VIDEO
OUTP~
COMPOSITE VIDEO
OUTP~j-----
Component video adapter
Your TV
---ID>IPr (Red)
---ID>IY (Green)
--~Pb
(Blue)
Connecting your VCR to the system (optional)
The type of video connection used with your TV must match the type of connection used with
your VCR, if you choose to connect it to the system. If you connected your TV to the COM-
POSITE VIDEO OUTPUT, connect your VCR output to the COMPOSITE VIDEO INPUT. If you
connected your TV to the S-VIDEO OUTPUT, connect your VCR to the S-VIDEO INPUT. If
your VCR does not have an S-VIDEO output, you may be able to connect your VCR compos··
ite video output directly to your TV.
) N@te:
If your VCR did not come with the stereo audio and video cables required to connect it
to your LIFESTYLE!" system, contact your local electronics store or authorized Bose dealer.
The rear panel of the media center provides audio and video connections for your VCR.
1. Using the supplied stereo audio cable, connect the left (L) and right (R) audio outputs on
the rear panel of your VCR to the Land R VCR audio inputs on the rear panel of the
media center.
2.
Using the supplied video cable, connect the COMPOSITE video input on the rear panel of
the media center to the VIDEO OUT on the rear panel of your VCR.
) N@te:
You should not connect the video output of your LIFESTYLe system to a VCR, since
playing copy-protected OVOs may result in poor picture quality
Figure 14
Media center-to-VCR video
and audio connections
16