Using Digital Audio Connections - Bose Lifestyle 18 Series II Installation Manual

Reference
Figure 26
AUX input connections

Using digital audio connections

Figure 27
Digital audio and other
media center panel
connections.
30
If your TV, VCR, tape deck, or AUX component has digital audio output jacks, you may con-
nect them to the media center. In addition to the digital connection, be sure to connect L and
R stereo outputs from the component to the media center. This will provide uninterrupted
audio. See Figure 27.
• For a digital connection, use a 75 cable with RCA connectors (such as a video cable).
• For an optical digital connection, insert an optical digital cable into the Optical IN on the
media center rear panel. Use the Optical OUT jacks on the media center rear panel if you
plan to make a digital recording from that component.
Note: Before you can listen to a source through the OPTICAL input, you need to assign the
OPTICAL connection to that source: TV, VCR, CBL/SAT or AUX. See your operating guide for
instructions on using the system menus.
Antenna extender
IR emitter
Serial data
Media center connector panel
CD changer or other playback equipment
Optical audio connections
Data port
Digital audio connections