Connecting The Speakers To The Acoustimass Module; Connecting The Plug-In Cable To Jewel Cube; Speakers - Bose Lifestyle 18 Series II Installation Manual

System Installation
Figure 7
Front features of the media
center
Connecting the speakers to the Acoustimass
A
B
C
12
Front door – Make sure you have
enough room to lift this door.
Disc tray – Make sure nothing blocks this
CD/DVD tray as it slides open.
CAUTION: Before you make any connections, be sure that the media center, the Acoustimass
module, and any additional equipment are not connected to AC power.
Your system may have Jewel Cube
connect, or cube array or single cube speakers (images B and C respectively,) which use a
two-wire cable. LIFESTYLE

Connecting the plug-in cable to Jewel Cube

Note: If your system has cube or cube array speakers, follow the instructions in "Making the
two-wire connections for cube or cube array speakers" on page 13.
The positive and negative wires of the plug-in cable are properly oriented for polarity and the
plug is designed to fit only one way into the jack.
1. Match the correct cable to the corresponding speaker location:
• Front speaker cables have blue RCA connectors on one end and speaker plugs at the
other end with L (left), R (right), or C (center) markings.
• Surround speaker cables have orange RCA connectors at one end and speaker plugs
at the other end with L (left) or R (right) markings.
The IR Emitter, which enables certain
remote control operation, is located here.
® module
®
speakers (image A on the left), which use a plug-in cable
® DVD systems include five speakers.
Display window – Make sure you can see
this information while using your system.

speakers

®
®