IBM 88701RX User Manual page 54

The RSA II-EXA breakout cable: The ASM breakout cable connects the Remote
Supervisor Adapter II-EXA to the ASM interconnect network, the server USB port,
and an external modem.
Figure 15. RSA II-EXA breakout cable
RSA II-EXA breakout cable connections: The RSA II-EXA breakout cable is used
to provide the following connections:
v ASM Interconnect port
v USB connector
v Management ports
42
xSeries 445 Type 8870: User's Guide
To connect the Remote Supervisor Adapter II-EXA to an ASM interconnect
network, connect a Category 3 or Category 5 cable to one of the ASM
Interconnect ports on the RSA II-EXA breakout cable. For more information, see
"Using the ASM interconnect network" on page 63.
To connect the Remote Supervisor Adapter II-EXA to the USB port on the server
for providing remote keyboard, video, and mouse control of the server, plug the
USB connector on the RSA II-EXA breakout cable into a USB port on the server.
To connect the Remote Supervisor Adapter II-EXA to a modem, connect the
modem to a management port connector on the RSA II-EXA breakout cable.
Note: Connecting a modem to the Remote Supervisor Adapter II-EXA provides
dial-out support only.
ASM RS-485
connector
USB connector
Management
connectors