IBM 88701RX User Manual page 53

v The remote disk function requires the following software:
– Server (for the server operating system to support the remote disk): Microsoft
Windows 2000 with Service Pack 3 or above.
– Client: Microsoft Windows 2000 or above and the Java
v To configure the remote alert recipients for Director over LAN or Director over
modem, the remote alert recipient must be an IBM Director-enabled server with
UM Server Extensions.
v The Remote Supervisor Adapter II-EXA supports the following Web browsers for
remote access. The Web browser that you use must be Java-enabled and must
™
support JavaScript .
– Microsoft Internet Explorer 4.0 (with Service Pack 1), or later
– Netscape Navigator 4.72, or later (version 6.0 is not currently supported)
Notes:
1. JavaJava plug-in version 1.4 or later is required.
2. The Remote Supervisor Adapter II Web interface does not support the
double-byte character set (DBCS) languages.
– Support of HTTP version 1.0, or later
– Minimum display resolution of 800 x 600 pixels and 256 colors
Note: The ASM Web interface and the ASM text-based interface do not support
the double-byte character set (DBCS) languages.
Cabling and configuring the Remote Supervisor Adapter II-EXA
Complete the following steps to cable and configure the Remote Supervisor Adapter
II-EXA.
Note: After you initially configure the adapter, use the Web-based interface to
create a backup copy of the configuration. If you need to replace the adapter in the
future, you can restore the configuration and resume normal operation more quickly.
See the IBM Remote Supervisor Adapter II User's Guide on the IBM xSeries
Documentation CD for details.
Step 1.
Cable the Remote Supervisor Adapter II-EXA. (See "Cable the Remote
Supervisor Adapter II-EXA" on page 43 for instructions.)
Step 2.
Get the Remote Supervisor Adapter software and firmware. (See "Obtaining
Remote Supervisor Adapter II-EXA software and firmware" on page 44 for
instructions.)
Step 3.
Complete the setup of the Remote Supervisor Adapter II-EXA. (See
"Completing the setup" on page 46 for instructions.)
For service, assistance, or additional information on the World Wide Web, see
Appendix A, "Getting help and technical assistance," on page 71.
™
1.4 Plug-in or later.
Chapter 2. Configuring the server
41