IBM 88701RX User Manual page 45

Using express configuration
Complete the following steps to use express configuration:
1. In the ServeRAID Manager tree, click the controller.
2. Click Express configuration.
3. Click Next. The "Configuration summary" window opens.
4. Review the information in the "Configuration summary" window. To change the
configuration, click Modify arrays.
Figure 7. "Configuration summary" window
5. Click Apply; then, click Yes when asked if you want to apply the new
configuration. The configuration is saved in the controller and in the physical
drives.
6. Exit from ServeRAID Manager and remove the CD from the DVD-ROM drive.
7. Restart the server.
Chapter 2. Configuring the server
33