Setting The Work Clamp Lift Amount - Brother BAS-300G Instruction Manual

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-7. Setting the work clamp lift amount

The setting for the work clamp lift amount can be changed using the operation panel.
* For pneumatic work clamp specifications, only threading mode and intermittent presser foot height setting mode will be
available.
1
All indicators switch off
THREAD/CLAMP indicator illuminates
2
Motor-driven work clamp specifications only
When memory switch No. 003 is set to "2"
NOTE:
When setting the work clamp height and the
intermediate presser foot work clamp height, check
that the slider (1) is touching the work clamp lifter
plate assembly (2).
5254Q
31
MENU indicator switches off
BAS-300G, BAS-311G, BAS-326G
Press the THREAD/CLAMP key.
The sewing machine will switch to threading mode.
• " 1" will appear in the PROGRAM No. display, and the work
clamp will drop.
Press the key.
The sewing machine will switch to work clamp height setting
mode.
• " 2" will appear in the PROGRAM No. display, and the work
clamp will rise to the setting value that appears in the menu
display.
(Work clamp height setting: 15 − 25)
or
Press the key to set the work clamp height.
• The work clamp will rise or drop to the height of the new value
that has been set.
key.
Press the
The sewing machine will switch to intermediate work clamp
height setting mode.
• " 3" will appear in the PROGRAM No. display, and the
work clamp will move to the setting value that appears in
the menu display.
(Intermediate work clamp height setting: 1 − 15)
or
Press the key to set the intermediate work clamp
height.
• The work clamp will rise or drop to the height of the new
value that has been set.
4445Q
5224Q
4959Q